| Revision |
Date |
Description |
| 293 |
Feb 10, 2022 |
|
| 292 |
Oct 9, 2020 |
- Fixed energy calculation for local damping
|
| 291 |
Aug 26, 2020 |
- Added warnings for setting analytical thermal properties more than once.
- Added some more information to error messages
|
| 290 |
May 19, 2020 |
- Fixed small bug in crack flow logic
- Added z_discharge FISH function
|
| 289 |
Apr 16, 2020 |
- Fixed bug in gas flow calculations.
|
| 288 |
Apr 2, 2020 |
- No code changes. Fixed problem with 287 install.
|
| 287 |
Mar 18, 2020 |
- Added extra variable access for DFN fracture intersections
|
| 286 |
Dec 19, 2019 |
- Added cnode_near FISH function.
- Added plotting of node spare variables for liners.
|
| 285 |
Dec 7, 2019 |
- Now checks for removed blocks in the z_inside function
|
| 284 |
Nov 26, 2019 |
- Added tolerance to z_inside function
- Fixed bug in cable node placement when node lies outside of block
- Fixed bug in application of normal velocity boundary condition with local damping
|
| 283 |
Nov 21, 2019 |
- Now using latest security key drivers
- Added FISH function z_inside
|
| 282 |
Sep 23, 2019 |
- Fixed bug in user defined scalar plot item
|
| 281 |
Sep 20, 2019 |
- Fixed big in BOUND FREE command hat was slowing down calculations
- Fixed bug in joint plot item that was causing crashes
|
| 280 |
Sep 17, 2019 |
- Fixed bug in joint energy calculations
|
| 279 |
Aug 12, 2019 |
- DENSIFY TET now retains joint ID number
|
| 278 |
May 31, 2019 |
- Added cable_strain FISH function
|
| 277 |
May 1, 2019 |
|
| 276 |
Apr 30, 2019 |
- Added fish functions to access aperture joint material properties (see Additions.pdf)
- Fixed bug in NMD when hexahedral zones are present
- Added warning for negative volume blocks
|
| 275 |
Mar 17, 2019 |
- Added extra error messages for bad orthogonal vectors
- Enable free-fields with fluid planes
|
| 274 |
Jan 7, 2019 |
- Fixed bug in applying proppant mass concentration boundary condition
- Fixed bug in FISH function that displays thermal time when using analytical solution
|
| 273 |
Nov 20, 2018 |
- added merge_face command to merge coplanar faces on blocks
|
| 272 |
Oct 2, 2018 |
- Fixed bug in scale box plot commands
- Proppant mass concentration for plotting and FISH now mass/length^2
|
| 271 |
Sep 20, 2018 |
- Fixed bug in continuously yielding joint models with config fluid
- Proppant stiffness now has a maximum equal to the joint stiffness
- Fluid flow now permitted through bridged proppant areas
|
| 270 |
Sep 10, 2018 |
- Added ability to put beams and liners on block surfaces next to excavated blocks
- Increased maximum number of faces per block
- Fixed bug in proppant force calculation when multiple cycle commands are given
|
| 269 |
Aug 29, 2018 |
- Fixed bugs in HIS NF_SUM and HIS SF_SUM
- Higher order tets now working for zone models.
|
| 268 |
Aug 9, 2018 |
- Fix problem introduced in update 262 that made zone model dlls incompatible
- Fix problem with face_zone FISH function
|
| 267 |
Jul 30, 2018 |
- SET MERGE now working for POLY PRISM command
- DENSIFY HEX now working when non-hex blocks are present
- Prevent program crash on restore when bad FISH pointers are present
|
| 266 |
Jul 20, 2018 |
- Added missing dlls from 265 update
- Fixed bug in thermal logic when block temperatures are initialized to a constant temperature
- Added HEX keyword to densify command. SIGNIFICANT speed up to densifying hexahedral blocks.
- See Additions document
|
| 265 |
Jul 18, 2018 |
- Added adaptive cell space capability.
- Now possible to suppress contact formation between blocks with the same group.
- Added automatic fluid bulk modulus calculation
- Added ability for user to specify fluid timestep.
- See Additions document for details of all updates.
|
| 264 |
Jul 5, 2018 |
- Significant speed up of block importing
- Fixed bug in joint colors when plotted with colorby id.
|
| 263 |
May 29, 2018 |
- Fixed bug in densify command with gradlimit keyword
- Fixed bug in plotting applied velocities
|
| 262 |
May 21, 2018 |
- Fixed bug in command plot bcontour bextra
- Fixed bug in mass scaling for beam contact stiffness
|
| 261 |
May 4, 2018 |
- Fixed bug when cycling after SOLVE AGE.
|
| 260 |
Apr 5, 2018 |
- Mouseover for blocks now displays region and material
- b_findindex FISH function added (returns index for input id)
|
| 259 |
Mar 14, 2018 |
- Color by joint set added to contact plot item
- Fixed bug in RANGE SURFACE
- Fixed bug in saving and restoring joint colors
- Fixed bug in deterministic contact detection
|
| 258 |
Feb 21, 2018 |
- Removed print statement added for rigid blocks in version 252
- Added "Elastic (yield in past)" to cable state plot.
|
| 257 |
Feb 14, 2018 |
- Added contact plot item
- Added ability to specify relationship between hydraulic and mechanical aperture (FLUID aper_f)
- Added gap tolerance used in creation of subcontacts (SET gtol)
- Fixed output of plot item name for cable bar chart plot item.
|
| 256 |
Jan 23, 2018 |
- History can now be applied to pore pressure boundary condition
- Fixed bug in fluid timestep calculation when matrix flow is off
|
| 255 |
Jan 4, 2018 |
- Use of IDs for flow knot plot ranges now enabled
- Wireframe checkbox for flowplane contours now working.
|
| 254 |
Nov 17, 2017 |
- Flow zone permeability calculation now consistent when proppant is on or off
- Email FISH functions now working
|
| 253 |
Nov 10, 2017 |
|
| 252 |
Nov 3, 2017 |
- Added ability to specify and plot proppant mass concentration
|
| 251 |
Sep 29, 2017 |
- Fixed bug in plot of bgroup with cutplanes
- Fixed bugs in exporting of plot commands for groups with slots
|
| 250 |
Sep 13, 2017 |
- Fixed bug in using the BOUND command with rigid blocks and group ranges.
- Fixed bug in assigning jcons 7 to part of a contact.
|
| 249 |
Aug 14, 2017 |
- added error message if set energy is used without config energy.
- fixed an error in the timestep calculation when damp contact is being used.
- significant speedup of 'delete' command
- significant speedup of 'excavate' command
- bug fix in 'gen fix' command
|
| 248 |
Jul 24, 2017 |
- Fixed bug in plotting of fluid viscosity
- Added 'fluid bulk auto' command for fast flow (experimental)
- Fixed bug in beam axial strain calculation (only affects plotting and ultimate rupture strain)
|
| 247 |
May 2, 2017 |
- Changed angle tolerance for flow plane creation to be the same as cutting
- fpx_aperture fish function now limited by maximum aperture
- Fluid velocity calculation (for plotting) now limited by maximum aperture
- Aperture plot item now limited by maximum aperture
- Mechanical aperture plot item added
- Fixed bug in zone group plotting
- Fixed bug in beam strain rupture criterion
|
| 246 |
Apr 10, 2017 |
- Fixed bug in flow planes introduced in update 245
- Fixed but in viewing of group names with mouse over.
- Fixed bug in histories ar_sum, sf_num, sf_sum
|
| 245 |
Mar 16, 2017 |
- Fixed bug in flow plane generation.
- Fixed bug in thermal apply logic with histories when mechanical is off.
- Added SET CREEP command.
|
| 244 |
Mar 8, 2017 |
- Fixed bug in CABLE APPLY command with INDEX keyword
|
| 243 |
Feb 27, 2017 |
- Added sreg checkbox for block plots
- Removed join_contact off command
- Added ids to liner node queries
|
| 242 |
Jan 20, 2017 |
|
| 241 |
Jan 10, 2017 |
- Updated constitutive models
- Fixed bug in free field plotting
|
| 240 |
Dec 15, 2016 |
- Added the apex correction for tensile failure to the Modified Hoek Brown model
- Fixed bug in GEN FIX command
- Added warning for import of non-planar faces
- Added face_isplanar FISH function
|
| 239 |
Nov 29, 2016 |
- New splash screen
- Fixed bug in vertex group ranges
|
| 238 |
Nov 16, 2016 |
|
| 236 |
Oct 17, 2016 |
- Fixed bug in plotting of applied force vector
- All 5.2 manuals now included
|
| 235 |
Oct 6, 2016 |
- Fixed bug in SOLVE FORCE
- Updated help and 520 manuals
- Fix bug in orthotropic constitutive model
|
| 234 |
Sep 19, 2016 |
- Added group output for mouse-over of blocks
- Fixed bug in apply temperature history table
- Updated tutorials for 5.2
- Updated 5.2 manuals
|
| 233 |
Aug 18, 2016 |
- Fixed bug in zone plotting
- Fixed bug introduced in 232 related to creep timestepping
- Fixed 'bug' in apply command that fixed non-specified dofs
|
| 232 |
Jul 27, 2016 |
- Fixed bug in creep timestepping
- Temporarily turned off multi-threading for matrix flow
- Modified LINER.FIN fish file
|
| 230 |
Jun 30, 2016 |
- Correction to fracture id assignment
- Correction to assigning of joint material properties with DFNs
|
| 229 |
Jun 16, 2016 |
- Fixed bug in fluid flow related to flow in uncracked zones
- Fixed bug in solve command when there is excavated material
- Fixed bug in fill command when jmat or jcons is specified
|
| 228 |
Jun 8, 2016 |
|
| 227 |
Jun 7, 2016 |
- PRE-RELEASE
- Added most manuals for 5.2
- Fixed problem with security
- Add jmohr joint constitutive model as standard
- Added faceplate plot item for cables
|
| 226 |
May 17, 2016 |
- updated icons
- fixed bug in histories with fluid-mechanical coupling
- fixed problem with fast flow and proppant
|
| 225 |
May 3, 2016 |
- BETA RELEASE
- added fish and command reference
|
| 224 |
Apr 7, 2016 |
- fixed bug in calculation of timestep with proppant
- fixed bug in 'solve fos cycle' command
|
| 223 |
Mar 28, 2016 |
- dowel plot item now a plug-in
- fixed bugs in cable query and cable property printing
|
| 222 |
Mar 18, 2016 |
- more fixes to security
- improvements to cable bar chart plot item
- added flowvol_unbav and flowvol_unbmax FISH functions (for fast flow)
- fixes to creep and addition of asymmetric latency
|
| 220 |
Mar 9, 2016 |
- correction to flow plane generation
- update security logic.
- creep and mechanical timesteps now in sync by default
- fixed bug in cable bar chart plot
|
| 219 |
Feb 19, 2016 |
- changed 'list zone poly' command to dump to file
- modified fragment command to consider unbonded contacts
- further development of cable bar chart plot item
|
| 218 |
Feb 11, 2016 |
- correction to logic to delete negative volume zones
- added checks to erflag
- further development of cable bar chart plot item
- added dip and dip direction to contact query
|
| 217 |
Feb 8, 2016 |
- correction to contact forces for large normal rotations
|
| 216 |
Feb 2, 2016 |
- correction to logic to delete negative volume zones
- correction to contact logic for case of EE contacts
- correct contact normal; improve EE sub-contact detection
|
